Headquarters, Air Force Reserve Command

AIRCRAFT MECHANIC

Patrick AFB, Florida $31 - $36 PH WG Closes Oct 23, 2026

This announcement is sourced from the official USAJOBS API. Federal Job Alerts is not affiliated with OPM, USAJOBS, or any U.S. government agency.

Summary

This is an Air Reserve Technician (ART) enlisted position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow the incumbent to fully participate in unit training assemblies. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities. In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for for WG-8800 Aircraft Overhaul Family. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to perform the duties of a AIRCRAFT MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the make-up, operation, installation, and adjustment of a variety of interrelated and/or integrated aircraft systems, subsystems, and assemblies including, but not limited to: fuel and hydraulic systems, flight control systems, instrumentation systems, engines, landing gear assemblies, airframe, and control surfaces. 2. Knowledge of a wide variety of parts, components, subsystems, and assemblies such as ejection seats, nuclear shielding, or similar self-contained systems. 3. Knowledge of safety regulations, practices, and procedures. Ability to rig, operationally test, and/or troubleshoot systems; determine when they are operating properly or whether portions of the system should be repaired or replaced; and the type and extent of adjustment and alignment needed. 4. Knowledge of supply procedures, applicable publications, tools, equipment and material accounting, security, and documentation procedures. 5. Skill in the use of standard and specialized tools and test equipment including fixtures, templates, scales, test stands, and external power sources. 6. Skill in reading and understanding instructions, schematics and diagrams, specifications, blueprints, technical orders, data, and settings from aircraft instruments and gauges. FUNCTIONAL REQUIREMENTS: Heavy lifting (80 lbs and over). Heavy carrying (45 lbs and over). Reaching above the shoulder. Use of fingers. Both hands required. Hours of walking are approximately 4 Hours/day. Hours of standing are approximately 4 Hours/day. Hours of repeated bending are approximately 4 hours/week. Climbing, use of legs and arms. Both legs required. Operation of special purpose and/or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted). If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate. ENVIRONMENTAL FACTORS: Work is performed in hangar areas, outdoors, in aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, and hazardous fluids and gases). Potentially exposed to Hydrazine, Halon, and/or composites and Low Observable (LO). Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone. OTHER SIGNlFICANT FACTS: Performs other related duties as assigned. Performs uncommon tours of duty. May be required to fly in military or commercial aircraft for TDY purposes. Maybe required to work ove1time. The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required. This is an Air Reserve Technician (ART) position. Must meet and maintain Air Force Reserve requirements. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned some non-ART duties, generally not exceed 30% of total responsibilities. Work schedules will be so aligned to allow the individual to function fully on unit training assembly (UTA) weekends. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Major Duties

Performs inspection and troubleshooting on a variety of major aircraft systems, their assemblies, and components. Positions, maintains, disassembles, repairs, and reassembles major aircraft systems, their assemblies, and components. Accomplishes operational and maintenance record keeping, both manual and automated, associated with aircraft maintenance and repair. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. Certifies work produced under the USAF Technical Order Program. Perform flight duties during maintenance test flights and functional check flights.

Required Documents

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming. Online Application: Questionnaire Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply". Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of your most recent SF-50, Notification of Personnel Action, AND a SF-50 reflecting the highest grade held if different from your recent SF-50. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2". Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old). ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following: Name/Rank/Grade of Service Member Branch of Armed Forces Dates of Active Service (Start and End Date(s) Expected Date of Discharge/Release from Active Duty Terminal leave start date (if applicable) Expected character of service (honorable or general) and type of separation (i.e. separation or retirement) Must be certified within 120 days of anticipated discharge Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander. Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt. OPTIONAL DOCUMENTS: Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable. Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume. Note: Applicant must not submit award Notification of Personnel Actions (SF50s).

How to Apply

The complete Application Package must be submitted by 11:59 PM (ET) on 10/23/2026 To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13094376 To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process. To apply for this position, you must provide a complete Application Package which includes: 1. Your Resume. If you submit more than one resume, only the most recent will be reviewed. The "most recent" is considered the resume with the latest timestamp. Resumes may not exceed two pages. The two-page resume ensures the most relevant experience is reviewed and considered, which is a common practice in both the public and private sectors. Resumes exceeding two pages will be removed from consideration. Additional information on how to complete or update your resume may be located here. For qualification determination your resume must contain hours worked per week and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient, and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees may list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs, inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume. If the resume you submit contains such information you will not be considered for this vacancy. Your name, first and last, MUST be included on your resume. 2. A complete Application Questionnaire 3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name. 4. Help recruiters find you. Make your resume and profile searchable, which means recruiters may contact you about possible jobs. Additional information may be located here. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify or change any answers submitted by an applicant.